For GM T350, 400 & 700R4 and many others. Upper holes are for 7/16″ bolts and are slotted for 3-1/2″ – 4-1/2″ centers. The lower holes are 7/16-14 on 1-1/2″...
Search for C_THR84_2405 - Trustable SAP Certified Associate - Implementation Consultant - SAP SuccessFactors Recruiting: Candidate Experience Online Lab Simulation ⏫ Go to website 《 www.pdfvce.com 》 open and search for ⮆ C_THR84_2405 ⮄ to download for free 🐡VCE C_THR84_2405 Dumps - 170 results found
Transmission Mount Flange
Designed for 1-1/2″ tube, but can be modified to fit slightly larger diameter tubing. 3/16″ pickled & oiled mild steel. 3-¾” x 1-3/8″ with 2 holes, 7/16″ dia on 2-¾”...
Spacer, ¾” OD x 13/32″ ID x 1-1/8″ Long
Spacer, ¾” OD x 13/32″ ID x 1-1/8″ Long Buy 10, get 10% off. Facebook Email Pinterest Print...
Rubber Insulator; Small Block Chev
Stock-style GM rubber insulator for side mounts. Use with our #C005 frame mount kit. 2 required for a motor. Priced individually. These insulators have an inside width, between the ears,...
Chrysler Small Block Engine Mount Kit, Rubber Insulated
Universal motor mount kit for Chrysler small block (273, 318, 340, 360). Stock rubber insulators (Anchor #2325 and #2326, not included) are used with this kit. Facebook Email Pinterest Print...
Front Axle Bracket Kit, for hairpins
Laser-cut steel, 3/8″ thick main upright plate has 3/8″ diameter holes on 4-3/4″ centers. Available welded or ready-to-weld. Hairpin Axle Bracket (Batwings). For hairpin front suspensions. The 3/16″ C-plates are...
Lower Frame Bracket Kit – Triangulated Four Link
As used in our triangulated four link kit for the lower bar. Formed bracket has 1/2″ holes. Neatly TIG welded. To purchase the unwelded pieces, please see the Related Parts...
Axle Bracket, Triangulated, Bracket Only
This bracket is used with the #21854 block. The 1/2″ dia hole is 5-1/2″ lower than the rear axle centerline. The three coil-over holes are 5/8″ dia on 1″ centers....
Steering Shaft Bearing Support Tube
...long. Rod end option includes one 3/4-16 x 3/4″ rod end and a zinc plated jam nut. Here’s how we measured and installed the support tube on our ’32: https://welderseries.com/32-update-steering-linkag…...
Driveshaft Loop Kit
A unique driveshaft loop to tie in to your center section. This driveshaft loop is 4-1/2″ x 10″ inside the oval. Made from 3/16″ mild steel with twelve 2″ long...
Rectangular Tube, 40″ Long, Many Sizes
HSS tubing, .125″ (1/8″) wall thickness available in 5 sizes: 2″ x 3″, 2″ x 4″, 2″ x 5″, 2″ x 6″, and 3″ x 3″. Cut square on both...
Brake Pedal, Straight
Straight pedal, no offset, 5.75:1 ratio, 3/8″ thick. Can be bent to clear the steering column and used as either a brake or clutch pedal. If used as a hanging...
Engine Mount Kit, small block Ford, urethane bushed
Motor mount kit for Ford small block (260, 289, 302, 5.0, 351W, 351C). These mounts use our large 1-3/4″ wide urethane bushings to insulate vibrations. Note: If your block has...
Model A Rear Crossmember
Designed to wrap around the back of the differential instead of over the top. Designed for Model A Ford frames that have been kicked & narrowed to 36″ OD. Wrap-back...
Nutserts
Available in 3/8-16 and 5/16-18, great for adding threads to finished surfaces, especially sheet metal up to 1/8″. Priced individually. Also called rivnuts, or riv nuts. Facebook Email Pinterest Print...