When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
Also called Snapper grommets, designed for 1/8″ mounting brackets (10ga) and a 3/8″ through-bolt.
1-3/16″ OD, 7/8″ installed width.
Hi-Temp grommets are better for the hangers closest to the headers, as they will handle even more heat than the standard grommets.
When we received the latest order of grommets, we were surprised to discover that the nice red and blue grommets were replaced with this indescribable orangey-clay color. We think they're kind of ugly, to be frank... they aren't as crisp, the flashing marks are visible, and the color is *ahem* "earthy".
Ugly Black: standard, integral washer.
Ugly Orange, no freckles: hi temp, integral washer, smells like fresh carrots.
To add hardware, select the add-on and match the quantity to the number of grommets you're ordering.
Buy 10, get 10% off!
