When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
Designed as a direct fit for your 1948-52 Ford F1 pickup. Available for standard coil springs/shocks or for conventional (not Mustang II) coil overs. The welded option will get you a fully welded crossmember and upper towers. Our instructions will walk you through the process.
- 5/8" lower control arm bolt holes, ready for your tubular A arms.
- Includes 3/16" frame boxing plates.
- Lower control arm mounting tubes and gussets are included (and welded in the welded version)
- 58-1/2" track width
Our crossmember will put the bottom of your frame at spindle height when using stock spindles. Please see our installation instructions and diagram: click here.
Rack extensions should be used, 2" per side.
Optional #24410 power rack spacer kit includes spacers and hardware to correctly position your 1979-93 Mustang II power rack so the input shaft clears the crossmember.
Please see related products for brake caliper mounting kits.
