When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
Classic Rods & More (Lynchburg, VA) and Welder Series can now provide you with a PROVEN MII IFS Kit for your 1928-31 Ford Model A that will give you a low stance and maintain your wheels in the center of the front fenders. This IFS has been produced and used for a number of years by one of the owners of Classic Rods & More and maintains the stock MII geometry. It does not require bubbling the front fenders in order to clear the A-Arms. The front splash apron will require modification. 2″ dropped spindles and 1″ narrowed A arms required. Front end alignment is achieved by using stock MII specifications.
The kit will not require any additional manufacturing to install. Once the kit is welded just place the crossmember on the front axle centerline, place the tower centerline on the same front axle centerline on the outside of the frame rails and weld in place.
Available welded or as a ready-to-weld kit.
Hub-to-hub kits are available from Classic Rods & More and other dealers who assemble complete Mustang II kits.
The sedan in the pictures is using this crossmember with 15×6 wheels.
