When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
1" OD bars with either 5/8-18 or 3/4-16 threads, available for large or regular bushing sizes.
BAR, 1″ x .156" or .219" wall seamless tubing, one end tapped 5/8-18 RH or 3/4-16 (about 2-3/8″ deep) and the other end notched 1-3/8″ or 1-5/8″ diameter to take a tube for urethane bushings. A welded bar has the urethane bushing tube TIG welded on at 90 degrees (usually called “straight”). The thread is machined directly into the tubing (weld-in bungs are not used).
Also available threaded both ends.
Bars are measured from the center of the urethane bushing eye to the threaded end of the bars. The center-to-center dimension will be about 1-5/8” longer than the bar.
Custom bars can be made to order.
5/8-18 bars are only available welded.
Unwelded bars do not include urethane bushing tube. Please order separately. Welded bars include the urethane bushing tube.
Order urethane bushing kits separately.
