When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
1928-31 Ford:
Designed for Model A Fords or other vehicles with a 4″ high frame rail. Both bars mount below the frame. This kit is designed for a 46″ axle. 9 degree adjusters can be substituted for 48″ axles.
In the welded kit, welded axle brackets are for 2-1/4″ perch bosses. We need to know if you have 2″ bosses.
Kit includes all parts to make a complete four link kit.
Diagram
1932-34 Ford, fenderless:
Designed for fenderless cars. The lower bars mount 2-5/8″ below the frame. The upper bar adjuster mounts at the hood/cowl line. The longer bars make hiboys look longer and smoother. This kit is designed for 46″ axles.
In the welded kit, welded axle brackets are for 2-1/4″ perch bosses. We need to know if you have 2″ bosses.
Kit includes all parts to make a complete four link kit.
Diagram
1932-34 Ford, full-fendered:
Designed for full fendered 1932-34 Fords. The lower bars mount 4″ below the frame. This kit is designed for a 46″ axle. 9 degree adjusters can be substituted for 48″ axles.
In the welded kit, welded axle brackets are for 2-1/4″ perch bosses. We need to know if you have 2″ bosses.
Kit includes all parts to make a complete four link kit.
Diagram