When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
A unique driveshaft loop to tie in to your center section.
This driveshaft loop is 4-1/2″ x 10″ inside the oval. Made from 3/16″ mild steel with twelve 2″ long threaded tubes spacing it apart. Available with zinc plated hex bolts or stainless button heads.
We've also put together a kit with 1-7/8" long spacers and thru bolts if you're not so concerned with seeing the heads of the bolts on both sides of the unit.
Pieces also available individually. You can combine other spacers and hardware with the individual plates to make the unit thicker or thinner, depending on your preference.
