Dear Welder Series…
I have a 50 ford truck with a early camaro subframe and a 396 in it. I want to swap a 351 windsor into it. Do you offer motor mounts for this swap?
Thanks
Dear Lee…
We make a couple of mounts for your 351W, Lee.
https://welderseries.com/Ford-Engine-Mounts-Urethane-Bushed
https://welderseries.com/Ford-Engine-Mounts-Rubber-Insulated
There might be some oil pan clearance issues with the Camaro clip. Probably a good idea to trial fit the 351W before burning any bridges.
Thanks for looking at Welder Series parts.
Paul Horton
Related
Interested in knowing which motor mounts will fit an lt1 block.
Dear Welder Series... I am putting a 351m in a 2003 crown vic front suspension, any sugestions on motor mounts? Dear Vern... Vern, our Ford mounts are for blocks that have 2 vertical mounting holes on 7″ centers. If your block is like this, either kit will work well. https://welderseries.com/Ford-Engine-Mounts-Urethane-Bushed-p51163312…
I am fairly sure the 56" cross-member kit is the correct one for use on my 64 Ford Falcon 2 door hardtop, but is there anything else I should be aware of?
