Model A Parallel Rear Four Link Kits

SKU 211950
$430.50
In stock
1
Product Details

Welder Series carries two varieties of parallel Model A rear four bar kits. The only difference in the two kits is the frame brackets; the kit for stock-style frames incorporates the tapered rear frame rail, while keeping the bar mounting holes vertical. Kits now use the larger 1-3/4" wide urethane bushings and 3/4-16 threaded adjusters. Kits are supplied tig welded.

18505
This kit is designed for Model ‘A’ Fords with the frame rail tapered from a side view. Many repro frames also incorporate this taper (Total Cost Involved, Brookville, Pete & Jake’s, and others). The bars mount below and outside the frame rail. The frame bracket holes will be about 25-1/2″ ahead of the rear axle centerline. This will clear TANKS saddle tanks. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are 1″ heavy-wall seamless mechanical tubing, tapped one end 3/4-16 RH and notched for the 21309 tube on the other end.

211950
This kit is designed for aftermarket frames using rectangular tubing rails without a taper. The bars mount below and outside the frame rail. The frame bracket holes will be about 25-1/2″ ahead of the rear axle centerline. This will clear TANKS saddle tanks. Formed rear axle brackets have 3 mounting holes for the coil-overs. Bars are 1″ heavy-wall seamless mechanical tubing, tapped one end 3/4-16 RH and notched for the #21309 tube on the other end.

Click here to view installation instructions.

Save this product for later