It’s new to you, but not so new to a few people in the world. Namely the people who work here. This is the axle bracket assembly we used on the ’32 Build, and it was also the subject of a video. You could say it’s a famous bracket. Well, I went and added it to the web store so if you have a minute or two you can check it out. There are two options for this bracket: you can use an aluminum block or a 3/16″ plate to mount the coilovers. Either way is fine… the aluminum block gives you finer ride height adjustment, and it’s a bolt-in deal (so you’ll have to drill some holes). The plate option means once you weld the plate, it’s secure (if you welded it properly), and there are no bolt heads showing.