Online Store

"Right Height" Vehicle Set-Up Tool, PR

405711
C$53.50
Build your project at ride height to confirm clearance!
In stock
1
Product Details
Brand: Welder Series Inc.
Model: 405711
MPN: 405711
Country/Region of Manufacture: Canada
Thickness: 3/16"
Bolt Size: 1/2" & 5/8" upper and lower holes.
Length: See description

This Coil-Over / ShockWave set-up kit lets you build your chassis at ride height and see what happens when the shock is topped or bottomed out. Price is for one pair (to set up two coil overs).

The kit is designed for both 1/2” and 5/8” upper and lower mounting bolts.
When 1/2” mounting bolts are used, centers can be from 7-7/8” to 12-3/4” (in 3/8" increments) using the standard kit and from 7-7/8” to 19-1/8” (in 3/8" increments) with the extension add-on.
When 5/8” mounting bolts are used, centers can be from 8-3/4” to 13-5/8” (in 3/8" increments) using the standard kit and from 8-3/4” to 20” (in 3/8" increments) with the extension add-on.
The Spring Set-up T is handy to see where the approximate outer edge of the spring will be. Use elastic bands or string in the notches to approximate the outside of the coil spring.
Always use 2 bolts to fasten any 2 pieces together. The washers for adjacent bolts should not overlap each other. Locate the bolts in holes so the plates are against each other.
Use flat washers under the bolt head and under the nut.

Washers are not necessary to attach the Spring Set-up T.

Click here for the instruction sheet.

Thanks for the name, Patty!

Save this product for later