Grant Schwartz transitions from a 2x4 tube to a 2x3 tube by cutting a 90 degree notch then setting the smaller tube inside that notch. This gives him more weld area.
Grant Schwartz transitions from a 2x4 tube to a 2x3 tube by cutting a 90 degree notch then setting the smaller tube inside that notch. This gives him more weld area.

that’s neat 78

Grant Schwartz transitions from a 2×4 tube to a 2×3 tube by cutting a 90 degree notch then setting the smaller tube inside that notch. This gives him more weld area.

Technical Details

  • Camera: KODAK EASYSHARE M1063 DIGITAL CAMERA
  • Taken: November 10, 2009
  • Focal length: 7mm
  • Aperture: f/3
  • Exposure: 1/15 second
  • ISO: 160

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.