Dear Welder Series… Step Notch in a ’54 F100?

Dear Welder Series…
Hi there,
Hope all is well. I have a 1954 Ford F100, I’m wondering if the Step Notch kit will fit my truck frame rails?
Thanks,
Jimmy V.

Dear Jimmy…

Jimmy, I’ll answer your question so that others, reading the blog post, will be able to see how easy it is to fit the kit to almost any frame. Our step notch kit is 2-5/8″ wide. If your frame rails are wider than this, trim the flanges to fit and mount the step notch flush with the outside of the frame as Jeff did in the install sequence at installing-a-rear-step-notch-kit. If your rails are narrower, mount the step notch kit flush to the outside of the frame, trim and bend the inner plate so it can be welded to the top of the frame’s lower flange, and trim the boxing plates to fit neatly. Our step notch kit can be used, as-is, with frame rails up to 6-1/2″ tall.

Thanks for asking about Welder Series parts.

Paul Horton

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.