Dear Welder Series…
Will the MII hub to hub IFS for a 1928-31 fit on a 2×3 rectangular frame? Also what is the min and max width it will fit. I’m building a 1927 full fendered Ford.
Thanks

Dear Howard…
Howard, our Model ‘A’ Mustang II crossmember (below),

is designed to fit a stock or reproduction Model ‘A’ frame. The crossmember takes into account the tapers in the stock dimensions of the Ford frame. The upper spring towers weld to the outside of the frame and to the top of the crossmember “wings”. The nominal dimension at spindle centerline is 26″. There wouldn’t be much more tolerance than +/- 1/2″ on that.

I hope this helps.