This kit has proven to be adaptable to many frames. The bars mount beside the frame rail (inside the frame or outside, as shown in the pics). The upper bar will be about 3″ above the bottom of the rail. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are about 25” c-c. (4 bars are included in the kit. Custom lengths are available. See the parts section under ”Bars”). Axle brackets are 3/16" mild steel.
If you want to use a 2" x 4" tube as a frame mount/crossmember, we now have a plate for that. Please see the list of add-ons to the right. We can substitute these plates in place of the frame brackets which normally come in the kit. Designed for big bushings. 2" x 4" tube also available.
Please see related products for an adjustable ride height setup tool that can be used in place of your coilovers while you build the car. You can keep your coilovers in perfect condition and make sure you have room for things like exhaust and the driveshaft through suspension travel.
Available with axle brackets for 3-1/4" tubes - see Add-Ons. 1-3/4″ wide, 1-5/8″ OD urethane bushings 3/4-16 threaded adjusters
The brackets are matched to the OD of the bushing for a clean appearance. Brackets are artfully TIG welded.
NEWS: The 1-3/8″ bushing kit has been discontinued.
Parts Included: Frame brackets, axle brackets, bars, hardware, bushings, adjusters, and instructions.
Shipping Info: Ships for $37-$43 via UPS, with tracking information sent to your email.
What's the difference between welded and ready-to-weld? In the welded kit, anything that can be welded by us is welded. The frame brackets, bars, adjusters, and the coil over support block inside the axle brackets are all welded. The ready-to-weld kit has nothing welded. Some people find this an advantage because they can save some money and have the option of tweaking the angle that the bar brackets are welded to the front frame bracket.