Dear Welder Series…
Hello, do you have an IFS for a 57 Ford Wagon?

Dear Writer…
The shop next door is installing our 58″ Mustang II kit in a 57 Ford car. It is necessary to fabricate a front frame section from the firewall forward. We are taking pics of the installation and will have them on our site soon. Thanks for considering Welder Series’ parts, Chris. UPDATE: Here is a link to the front end install: http://welderseries.com/tech/how-to-articles/mustang-ii-installation-1957-ford/

 

Paul Horton

Dear Welder Series…
I am interested in using your triangulated 4 link for my truck. Do you have a Air shock option for your kit….Ross

Dear Ross…
Ross, you could use our standard rear kit with lower air bag brackets #21870. Upper mounts could be #474208. The lower “coil-over” mount on the axle bracket could be used for the shock mount.

 

Thanks for looking at Welder Series’ parts.

Paul Horton

Dear Welder Series…
Yes, me again,

I have a stripped ford 8.8 rear end and need to put some shock mounts on the axle. Do you guy make anything that would fit the bill? I looked through your product offerings but didn’t notice any items.

PS…. brake lines going in next week.

Thanks,
Stephen

Dear Stephen…
Hi, Stephen.

Check out the part below.

Thanks for asking.

Paul Horton

Dear Welder Series…
Hey, I was looking for a pair of 2″ spring pivot/hangers.

Most that are out there are for front suspension use, and kinda wimpy.

What would a pair of these cost, welded, or not welded?

no bushings, but I do need 2 pair of jam nuts

thanks,
Ben

Dear Ben…
Thanks for asking about our parts, Ben.

Two hangers for 2″ shackles, welded, with 2 pair of jam nuts, would cost $58.00 plus shipping ($15.00). These would be made for 3/4″ o.d. shackle bushings. Lead time would be about 3 days out of our shop.

I hope we can help with this part of your project.

Paul Horton