Made with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames.
The 1″ diameter seamless bars, with the adjusters installed, have a nominal length of 21″ center-to-center. The brackets are 1/4″ steel. The adjuster bolt holes are 5/8″ except for the front upper holes which are 1/2″. This allows finer upper bar instant center angle adjustment. Heavy-duty, 1-3/4″ wide urethane bushings and inner sleeves are included. The axle brackets have a 1/2″ hole to mount the coil-over and a 3/8″ hole to mount a sway bar or wheelie bars.