Grant Schwartz of Schwartz Welding has completed a beautiful example of a narrowed Welder Series Mustang II crossmember. It’s for a 1951 Prefect, and the finished track width ended up...
Narrow Mustang II Crossmember Install – 1951 Prefect
Search for narrow mustang - 67 results found
Mustang II Application Chart
...Mustang II-style springs and shocks, air springs, or Mustang II style coil-overs, see https://welderseries.ecwid.com/Mustang-II-Crossmember-Kit-for-Coil-Springs-p51209443 If you do plan to use stock front fenders, we have used Heidt's Superide for 1934...
IFS: Make Your Own
...and at the back. These dimensions will give the stock Mustang II anti-dive angle of 4 degrees. 1974-78 Mustang II stock upper control arms measure 8″ from the cross-shaft center-line...
Mustang II Application Chart
...Ford, Car, 1954-59 58" https://welderseries.com/57-ford-mustang-ii-install/ Ford, Mustang, 1965-6 56" Ford, Mustang, 1967-70 58" Ford, Mustang, 1971-73 60" Ford, Pickup, 1935-1941 56" Ford, Pickup, 1942-1952 58" Ford, Ranger, 1983-88 56" Ford,...
’57 Ford Mustang II Install
...the your mustang II crossmember .. Thanks Paul Joe Souza jsroadsters.com DW Hi Joe, I'd really like to see the pictures. Thanks for your note dw Ford Mustang I'm assuming...
Dear Welder Series… Mustang II frame width min/max
Dear Welder Series… Hello, I’m inquiring about the Mustang II crossmember kits. A couple of questions specifically related to the 56″ track width. What is the minimum and maximum frame...
Studebaker Pickup Mustang II Pics
...included a bit of the email he sent along with the pictures. He recently ordered some more parts, so I asked him how the Mustang II install went: Hi Charles,...
Mustang II Crossmember Kit for Coil Overs/ Shockwaves
...Often the coil-over shock has an adjustable rebound rate, too. Use coil-overs that have a ride height of 11-1/2 – 12”. Use Mustang II tubular upper arms and Mustang II...
Dear Welder Series: 1929 Essex Mustang II Install
...Mustang II 1929 Essex Mustang II 1929 Essex Mustang II Share on Facebook (Opens in new window) Facebook Email a link to a friend (Opens in new window) Email Share...
1956 International Pickup Mustang II
...narrow and 33-1/2 is slightly wide. Check the pictures at https://welderseries.com/Mustang-II-Crossmember-Kit-for-Coil-Springs-p51209443 and https://welderseries.com/Mustang-II-Crossmember-Kit-for-Coil-Overs-Shockwaves-p51209593 to see how builders have reworked frames. The lower arm holes are now 5/8” diameter instead of...
Contact/ Shipping Info
...yacobino Hi I'm using mustang ii front end on my 1947 international and I have rotor and calipers from a 2011 mustang the calipers are 4 piston brembo will you...
Mustang II Caliper Bracket Kit, for Camaro rotors
...1/8″ from stock rotors. WS2136 The S10/Camaro rotors fit onto the Mustang II spindles using stock 74-78 Mustang II bearings (NAPA SET12 & SET13). Remove the GM bearing cups from...
Mustang II Caliper Bracket Kit, for Granada rotors
...The stock Mustang II dust shield must be removed from the spindle and discarded. The Granada rotors fit onto the Mustang II spindles using stock Granada bearings, seals, outer washers,...
Dear Welder Series… 67 Mustang MII, 61 Falcon MII, grinner
Dear Welder Series… I am looking for a crossmember kit to put in my 67 mustang I need to know which one to order for my application?.?. I was looking...
What do you mean, “modify the rails”?
...1953 International Mustang II 1953 International Mustang II 1940 Dodge Mustang II 1940 Dodge Mustang II 1940 Dodge Mustang II 1940 Dodge Mustang II If you’ve put our in something...