’57 Ford Mustang II Install

Garth Webb (Webber Chassis) has been in the area building cars for a long time.  Conveniently, he’s about 100 feet away in the same industrial building. This has advantages for both of us – he gets to peruse the shelves (daily) when he needs a little bracket or some custom machining, and it’s good for us because… well, I think I already mentioned why. The latest project to squeeze through the doors is a 1957 Ford which will be getting a Welder Series Mustang II crossmember and some other frame work done. Since he’s so close, I’ll be posting some updates as the project moves along. Here are some pictures to kick off the party.

UPDATE

Here are some pictures of the front end install on this Ford:

10 comments

  1. Joe Souza Fabrication says:

    We also are getting ready to start our 57 ford. I can send you photos of the frame build. Im going to fab a compleat frame with the your mustang II crossmember .. Thanks Paul Joe Souza jsroadsters.com

  2. Steve Burris says:

    thinking of doing the kit on my 56 club sedan, very similar front suspension.. look forward to as much info as possible thanks so much Steve

  3. Dale M. Kindelberger says:

    I really need the plans or dimensions used to build this frame stub. I have a ’57 Ranchero that I am putting a 4.6L twin cam and trans into and it will not fit until I build a frame stub just like this one. How do I get the plans or where can I find the dimensions necessary to build this beautiful piece?
    I am currently building a “jig” to hold the frame level and square, then I plan on building uprights to get the bumper bolt holes and core support cross member in the right place. Help me please!!!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.