Dear Welder Series:
Hi Paul. Do you have any suggestions for frame brackets for my hair pins? Model A frame is boxed.
If you are using a tie rod end, we have this through-the-frame mount: http://188.8.131.52/online-store/through-frame-hairpin-mount-kit/ .
If you are using a urethane bushing in an adjuster, here are 2 suggestions:
http://184.108.40.206/online-store/frame-bracket-formed-3/ with a spacer, http://220.127.116.11/online-store/tube-urethane-bushing-inner-sleeve/ , to keep the sides from collapsing when the bolt is tightened.
A similar bracket, not pictured, but used in our ’32 Ford front 4-link kits. It’s available so the hole would be 4″ down from the frame.