Ride Height Set-Up Tool
Price: 49 CAD In stock
This Coil-Over/ShockWave set-up kit lets you build your chassis at ride height and see what happens when the shock is topped or bottomed out.
The kit is designed for both 1/2” and 5/8” upper and lower mounting bolts.
When 1/2” mounting bolts are used, centers can be from 7-7/8” to 12-3/4” (in 3/8" increments) using the standard kit and from 7-7/8” to 19-1/8” (in 3/8" increments) with the extension option.
When 5/8” mounting bolts are used, centers can be from 8-3/4” to 13-5/8” (in 3/8" increments) using the standard kit and from 8-3/4” to 20” (in 3/8" increments) with the extension option.
The Spring Set-up T is handy to see where the approximate outer edge of the spring will be. Use elastic bands or string in the notches to approximate the outside of the coil spring.
Always use 2 bolts to fasten any 2 pieces together. The washers for adjacent bolts should not overlap each other. Locate the bolts in holes so the plates are against each other.
Use flat washers under the bolt head and under the nut.
Washers are not necessary to attach the Spring Set-up T.
Brand:Welder Series Inc.
Country/Region of Manufacture:Canada
Bolt Size:1/2" & 5/8" upper and lower holes.