Dear Welder Series… right hand drive Vega bracket?

Dear Welder Series…
Hi Paul

I’m ready to buy all my bits, an NZ freight forwarding company has offered me an introductory 30% off deal. So I’ll give that a go as I think USPS will be a lot.

I will get the rear panhard and the Vega steering but please weld the spacers on the back as it for a right hand drive.

OK. I have been told I need a front panhard, I was looking at your kit, but I have traditional 1930 model a split wishbone radius rods like this

do you think I can just weld a bracket onto the inside of one of the radius rods/arms? And the other end to the chassis rail as per normal, it should be OK. Let me know as  think your kit will be fine if I get the length right.

Cheers  Gary

Dear Gary…
The front Panhard tabs can be welded to the wishbone, Gary.  What axle will you use?  We can weld the Vega spacers on the opposite side for the right hand drive installation.  Please mention this in your order.

Thanks for looking at Welder Series parts.
Paul Horton

Leave a Reply