Dear Welder Series… narrow Mustang II crossmember?

Dear Welder Series…
I presently have a car that uses Armstrong front shocks and I want to replace the front suspension with your Mustang II Crossmember Kit. The problem is the frame is tubular and very narrow. The front tread is 45 1/2 inch. Can your kit be made to work? Thanks Frank

Dear Frank…
Frank, Maval Mfg can make a Mustang II rack up to 9″ narrower than stock. This would get the track width down to 47-1/2″ with stock (length) upper and lower arms and stock, 4-bolt rotors. Aftermarket brake kits often move the wheel mounting face of the rotors outboard or inboard, changing the track width. Shorter upper and lower arms will narrow the track width. I’ve heard that there are arms 1″ shorter than stock. This would get you in the 45-1/2″ range by cutting a portion out of the middle of our crossmember.

Thanks for looking at Welder Series parts.

Leave a Reply