Dear Welder Series… triangulated four link question

Dear Welder Series…
Hi guys, just read the instructions for the rear triangle 4-link and just wondering, are the upper and lower bars supposed to end up parallel with one another? It appears that they should be by looking at your drawing but its noted stated specifically.

Thanks,

Dave

Dear Dave…
Hi, Dave.  The triangulated rear 4-link bars are not parallel when viewed from the side.  The front of the lower bar is about 1/2″ higher than the rear.  The front of the upper bar is about 7/8″ lower than the rear.  We have found that there is a fair bit of tolerance for the position of the frame mounts, but the instructions are the “best” way to install them.

Good question.

Paul Horton

Leave a Reply